Table of Contents
Advertisement
Quick Links
PV-ezRack
Planning and Installation Guide
Complying with AS/NZS1170.2:2011
Contents
1
Introduction
2
Installation Tools & Components
3
Installation Guide
4
Service
1. Introduction
18/20 Duerdin St
Clayton VIC 3168, Australia
www.clenergy.com.au
®
SolarTerrace III
™
2
3
5
11
Tel: +61 3 9017 6688
Fax: +61 3 9017 6668
Email: sales@clenergy.com.au
Advertisement
Table of Contents
Related Manuals for Clenergy PV-ezRack SolarTerrace III
Summary of Contents for Clenergy PV-ezRack SolarTerrace III
- Page 1 PV-ezRack ™ Planning and Installation Guide Complying with AS/NZS1170.2:2011 Contents Introduction Installation Tools & Components Installation Guide Service 1. Introduction 18/20 Duerdin St Tel: +61 3 9017 6688 Clayton VIC 3168, Australia Fax: +61 3 9017 6668 www.clenergy.com.au Email: sales@clenergy.com.au...
-
Page 2: Installation Tools
Please check that you are using the current version of the installation manual by contacting Clenergy Australia by email on sales@clenergy.com.au, or your local representative. -
Page 3: Component List
2) Inter Clamp 3) T Rail 4) Rail Clamp 5) BackBase 6) Front Base 7) T Rail Splice 8) Truss support 18/20 Duerdin St Tel: +61 3 9017 6688 Clayton VIC 3168, Australia Fax: +61 3 9017 6668 www.clenergy.com.au Email: sales@clenergy.com.au... -
Page 4: Installation Planning
2.4 Installation Planning Clenergy PV-ezRack SolarTerrace III is compatible for panels up to 1800mm long. Design for panels 1800mm long Design for panels 1580mm long Minimum spacing between 2 legs: 18/20 Duerdin St Tel: +61 3 9017 6688 Clayton VIC 3168, Australia Fax: +61 3 9017 6668 www.clenergy.com.au... - Page 5 Minimum anchor embedment depth of 90mm with concrete strength of 25MPa. For concrete specifications see STIII engineering certificate. 18/20 Duerdin St Tel: +61 3 9017 6688 Clayton VIC 3168, Australia Fax: +61 3 9017 6668 www.clenergy.com.au Email: sales@clenergy.com.au...
- Page 6 18/20 Duerdin St Tel: +61 3 9017 6688 Clayton VIC 3168, Australia Fax: +61 3 9017 6668 www.clenergy.com.au Email: sales@clenergy.com.au...
-
Page 7: Installation Process
3.1.3 Make sure the other connections on the components are tighten. 18/20 Duerdin St Tel: +61 3 9017 6688 Clayton VIC 3168, Australia Fax: +61 3 9017 6668 www.clenergy.com.au Email: sales@clenergy.com.au... - Page 8 3.2 Installing the T Rails 3.2.1 Before installing the T Rails, mark the position of the rails on the beam. Note: Clenergy will preassemble the bottom rail clamp when supplying the product for large projects. 3.2.2 Before installing the T...
- Page 9 Note: The end of the rails must line up. PV-ezRack Solar Terrace III_Planing and Installation Guide_V1.2 (Rev 1) Page 9 of 11 18/20 Duerdin St Tel: +61 3 9017 6688 Clayton VIC 3168, Australia Fax: +61 3 9017 6668 www.clenergy.com.au Email: sales@clenergy.com.au...
- Page 10 3.3 Installating PV panels 3.3.1 Install the panels by using patented Clenergy End Clamps and Inter Clamps. Clenergy recommends 750-1000mm rail overhang at the end of the array. It can be maximum 50% of the spacing between the STIII supports.
- Page 11 Clenergy’s written installation instructions, or if the Product has been modified, repaired, or reworked in a manner not previously authorized by Clenergy IN WRITING, or if the Product is installed in an environment for which it was not designed.
Need help?
Do you have a question about the PV-ezRack SolarTerrace III and is the answer not in the manual?
Questions and answers