SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
8)
The blood will be drawn into the strip
automatically. If the beeper is turned on the
meter will beep to let you know the test is
beginning.
9)
When blood is applied to the strip, the
display counts down from 5 to 1 seconds
and your result appears on the display in
just 5 seconds.
10) The blood glucose result is displayed in mg/
dL or mmol/L.
11) When the test is complete, pull out the
used test strip. The meter will shut off
automatically 5 seconds after you remove
the test strip.
•
•
NOTE
•
42
Dispose of all used test strips
in accordance with your local
guidelines.
Remove the inserted lancet from
the lancing device and dispose of
the used lancet according to local
guidelines.
Always use fresh capillary whole
blood on meter tests.