Inserting The Battery - SD CofeFree User Instruction Manual

SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM

9. Inserting the Battery

Inserting and replacing the Battery
Your meter is shipped with one 3V battery
type CR2032 that needs to be inserted before
testing. The battery that comes with your
meter can be found in the mesh pocket of your
carrying case. Battery life will vary depending
on usage, so always keep a spare on hand. The
meter saves battery power by automatically
turning off after 1 minute without inserting a
test strip or 3 minutes with a test strip, from
non-use. If the meter does automatically shut
off, all tests in memory are saved.
STEP-1: Push the recessed plastic tab of the
battery compartment forward to flip and open
the battery door.
17