SD CofeFree User Instruction Manual page 37

SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
Check
Did you insert test
strip firmly into the
meter?
Did you follow
the procedure
correctly?
Were the test
strips stored
correctly (between
2-32°C,
36-90°F)?Was
the bottle
cap replaced
immediately after
removing a test
strip?
Is the meter
damaged? Does
it show an error
code?
Is the control
result outside
the acceptable
range (printed
on your test strip
container)?
Action
Make sure the test strip
is inserted into the test
strip slot until it will go no
further.
Read again "Chapter 2:
Control Solution Test"
(pages 31-37) and retest.
If not, retest with a new
container of test strips.
If yes, contact your
distributor or SD
Biosensor Customer Care
Service Center at Tel :
+82-31-300-0400
Repeat the test. If you
get the same results, do
not use your meter and
test strip until you solve
the problem. If you still
have problem, call the SD
Biosensor Customer care
service center Tel:+82-31-
300-0400
37