SD CofeFree User Instruction Manual
  1. Manuals
  2. Brands
  3. SD Manuals
  4. Blood Glucose Meter
  5. CofeFree
  6. User instruction manual

SD CofeFree User Instruction Manual

Blood glucose monitoring system
Hide thumbs
Table of Contents

Advertisement

Quick Links

SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
Dear SD CodeFree™ System Owner;
Thank you for choosing the SD CodeFree™ Blood Glucose
Monitoring System. Your new SD CodeFree™ Blood Glucose
Monitoring System is an important tool that can help you
better manage your diabetes. Important steps for using the
System are inside this guide. Please read it carefully.
If you have questions, we are here to help.
Please contact SD Biosensor, Inc.
Tel : +82-31-300-0400
Fax : +82-31-300-0499
webside : www.sdbiosensor.com
We offer assistance 24 hours a day, 365 days a year in many
languages. You can also visit
diabetes management tools and product demonstrations.
Please refer to the instructions with the following
symbols in this User Instruction Guide.
Identifies conditions
or practices that
could result in
damage to the
equipment or other
CAUTION
property.
Before using this product to test your blood
glucose, read all instructions and practice
the test. Perform all quality control checks as
directed and consult with a diabetes health
care professional. These recommendations
apply to all blood glucose monitoring
systems and are supported by the American
NOTE
Association of Diabetes Educators, the
American Diabetes Association, the U.S. Food
and Drug Administration, and the Advanced
Medical Technology Association.
www.sdbiosensor.com
NOTE
for
Provides
additional
useful
information.

Advertisement

Table of Contents
loading

Related Manuals for SD CofeFree

Summary of Contents for SD CofeFree

  • Page 1 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Dear SD CodeFree™ System Owner; Thank you for choosing the SD CodeFree™ Blood Glucose Monitoring System. Your new SD CodeFree™ Blood Glucose Monitoring System is an important tool that can help you better manage your diabetes. Important steps for using the System are inside this guide.

  • Page 2: Table Of Contents

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM TABLE OF CONTENTS Chapter 1 : Understanding Your New System Before You Start Testing Special Information for Healthcare Providers and Carers Indications for Use Product Description and the Principle of use The Complete SD CodeFree™ Blood Glucose Monitoring System The SD CodeFree™...
  • Page 3 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Chapter 4 : Using the Meter Memory Searching Test Results Downloading results to a computer Chapter 5 : Maintenance and Troubleshooting Performing an SD Check Strip Test Cleaning the meter Maintenance, Testing and Transportation...

  • Page 4: Chapter 1 : Understanding Your New System

    Your new meter is designed for testing fresh capillary whole blood samples (for example, blood from your fingertip, palm, upper arm, or forearm). Only use SD CodeFree™ test strips. Other test strips will give inaccurate results. • Do not use the SD CodeFree™ blood glucose monitoring system for testing of serum or plasma or arterial, venous whole blood.

  • Page 5: Important Information

    • This meter has a pre-set unit, mg/dL or mmol/L, for your Country. It cannot be changed. • The SD CodeFree™ system has been found to be accurate at altitudes up to 12,388 feet (3,776 meters). • Keep the meter and testing supplies away from small children.
  • Page 6 • Repeated unexpected results: If continue to get unexpected results, follow the instructions on PAGE 60 “Performing an SD Check Strip Test”. If this shows no errors you should have the unit checked by your medical professional who can use a Control Solution to check the veracity of the results given(See pages 31-37).

  • Page 7: Special Information For Healthcare Providers And Carers

    (above 60%) or very low (below 20%) can cause false results. 3. Indications for use (Purpose of the device) Your new SD CodeFree™ meter and accessories work together to measure the amount of glucose (sugar) in your blood. Your SD CodeFree™ blood glucose monitoring...

  • Page 8: Product Description And The Principle Of Use

    4. Product Description and the Principle of use The SD CodeFree™ test strip is designed with an electrode that measures glucose levels. Glucose in the blood sample mixes with reagent on the test strip that causes a small electric current.

  • Page 9: The Complete Sd Codefree™ Blood Glucose Monitoring System

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 5. The Complete SD CodeFree™ Blood Glucose Monitoring System The system includes: • SD CodeFree™ Meter • SD CodeFree™ Test strips • SD Check strip • 3V battery type CR2032 • User Instruction Guide •...

  • Page 10: The Sd Codefree™ Meter

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 6. The SD CodeFree™ Meter Display Shows blood glucose result, messages and glucose result stored in memory. Arrow Buttons Used for meter setup and review of the results held in memory. ON/OFF Button Press to turn meter ON or OFF.

  • Page 11: Display

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Display Indicates Displayed when in Measurement setup mode time Warns when the Indicates beep battery is low setting or must be replaced Indicates if environmental Indicates post- temperature meal or pre-meal is exceeded during testing...
  • Page 12 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Indicates the Test strip average result Tells you when to apply the Indicates a sample and control indicates if you solution test select whole result blood for blood reference type Indicates alarm Indicates hypo...
  • Page 13 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 1) Strip Stand-by Display After turning on the meter, the image below will be displayed automatically showing a flashing test strip icon. In this Strip Stand-by Display, you are able to enter the setup mode (e.g.
  • Page 14 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM If you press the right arrow once when the Add Blood icon is flashing the Pre-meal icon will be displayed. This will indicate the glucose level being measured will be a Pre-meal reading. Pressing the right arrow a second time will show the Post-meal icon.

  • Page 15: The Sd Codefree™ Test Strips

    The SD CodeFree™ System measures the amount of glucose in whole blood. Blood is applied in the Yellow Window (TOP EDGE) of the SD CodeFree™ Test Strip and is automatically drawn into the reaction cell where the reaction takes place.

  • Page 16: Sd Codefree™ Accessories

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 8. SD CodeFree™ Accessories Lancet SD Check strip Electrode Hold Here Lancing Device Cap & Comfort dial with puncture depth selection AST Cap Release Arming Button Knob Cap & Comfort dial with puncture depth selection...

  • Page 17: Inserting The Battery

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 9. Inserting the Battery Inserting and replacing the Battery Your meter is shipped with one 3V battery type CR2032 that needs to be inserted before testing. The battery that comes with your meter can be found in the mesh pocket of your carrying case.
  • Page 18 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM STEP-2: Insert the 3V battery (type CR2032) into the compartment with “+” side facing you. STEP-3: Clip battery cover back in place. STEP-4: Push the ON/OFF button or insert a strip to start testing.

  • Page 19: Meter Set Up

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 10. Meter Set up STEP-1 : Setting the Audible Beep In Strip Stand-by Display, press the ON/ OFF button for 3 seconds and the display for setting the audible beep will be visible. The spanner symbol is always shown when in Setup mode.
  • Page 20 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM STEP-2: Setting the Hypo warning After setting the beep, the display shown below will appear. At the base of the display will be the hypo warning symbol (candy wrapper). Pressing the left or right arrow button will switch the hypo warning from OFF to 60,70,80 mg/dL or to 3.3, 3.9, 4.4 mmol/L.
  • Page 21 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM STEP-3: Setting the date and time Your new meter comes with a preset time and date. You may need to change the time to your time zone. Having the right time and date in your...
  • Page 22 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM [ Left or right [ ON/OFF button ] button ] Next will appear the setting display for month and day format. The meter can display the month and day in either a Month-Day (m-d) format or a Day-Month (d-m) format.
  • Page 23 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM [ Time Setting ] Next will appear the display for setting the 12 or 24 Hour clock format. The meter can display the time in either the 12h format or the 24h format. Set the preferred format on...
  • Page 24 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM STEP-4: Post-meal alarm The next setup option to appear will be the meter’s post-meal alarm function to remind you to test your blood glucose 2 hours after a meal. The display will show a flashing OFF symbol and a half eaten apple.
  • Page 25 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM • If you select the post-meal alarm ‘2h’ feature and subsequently, at any time, test your blood glucose level using the pre-meal mark, the NOTE ‘clock symbol’ will appear on the result display and the monitor will ‘beep’...
  • Page 26 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM STEP-5: Setting the alarm You can use the meter’s alarm function to remind you to test your blood glucose level. After the Post-meal alarm setting the display for setting the alarm will appear on...
  • Page 27 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM • If you select the alarm off feature, the Strip Stand-by Display will appear next. • If you select the alarm on feature, NOTE you can set the alarm up to four times a day at any time you want.
  • Page 28 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Once you have finished setting the first alarm, the second alarm setting mode will be displayed. Set the alarm the same way as in 2 and 3 above. You can set the third and fourth alarm in the same way as in 2 and 3 above.

  • Page 29: Using Sd Codefree™ Test Strips

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 11. Using SD CodeFree™ Test Strips [ Important Test Strip Information ] • Only use SD CodeFree™ test strips. Using other test strips with this meter can cause inaccurate results or even damage the meter. •...
  • Page 30 Avoid getting dirt, food or liquids on the test strip. With clean, dry hands, you may touch the test strip anywhere on its surface. • Do not bend, cut, or alter a SD CodeFree™ Test Strip in any way. • Apply only SD Control Solution or a blood sample to the test strip.

  • Page 31: Chapter 2 : Control Solution Test

    Why you should do a control solution test ; • SD Control Solution is used to check that the meter and the test strips are working together as a system and that the meter is giving accurate results.
  • Page 32 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM strips have been damaged. • The meter has been dropped or damaged. Before you begin ; • Use only SD Control Solution. • Check the expiration date on the control solution container. Record the opening date on the container label.

  • Page 33: Performing A Control Solution Test

    The meter does not include them in averages. For more information on how to obtain SD Control Solution, contact your distributor or call +82-31-300-0400 STEP-1: Remove a new test strip from its storage container.
  • Page 34 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM STEP-2: Press the left button for 3 seconds to check the testing system using a control solution in Blood Stand-by Display. If you don’t want a control solution check, press the left button again.
  • Page 35 Repeat the control solution test. The control solution range printed on the test strip container is for SD Control Solution only. It is not a recommended NOTE range for your blood glucose level.

  • Page 36: Troubleshooting Control Solution Test

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 2. Troubleshooting Control Solution Check Action Did you carry If not, do the test again. out the test in Insert a test strip; Press control solution the left button for 3 mode? Did you seconds in Blood Stand- see the“control...
  • Page 37 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Check Action Make sure the test strip Did you insert test is inserted into the test strip firmly into the strip slot until it will go no meter? further. Did you follow Read again “Chapter 2: the procedure Control Solution Test”...

  • Page 38: Chapter 3 : Testing Your Blood Glucose

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM CHAPTER 3 : Testing Your Blood Glucose 1. Getting a Drop of Blood Wash your hands in warm, soapy water. Rinse well and dry completely. Warming fingers can increase the blood flow. Turn the lancet insert cap counterclockwise...
  • Page 39 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM The comfort tip offers 5 different levels of skin penetration. • 1-2 : for soft or thin skin • 3 : for average skin • 4-5 : for thick or callused skin Prime the lancing device as shown below by pulling the top of the device.

  • Page 40: Performing A Blood Glucose Test

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 2. Performing a Blood Glucose Test Always wash hands with warm, soapy water. Rinse and dry them before testing. NOTE Remove a new test strip from the container. Be sure to tightly replace the container cap after removing test strip.
  • Page 41 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Before you perform a test, you can display the symbols that indicate post-meal or pre- meal mark by pressing the right button one or two times. [Pre-meal] [Post-meal] If you perform the pre-meal test while...
  • Page 42 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM The blood will be drawn into the strip automatically. If the beeper is turned on the meter will beep to let you know the test is beginning. When blood is applied to the strip, the...
  • Page 43 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM STEP 1 Line up the blood drop with the yellow window channel on the test strip. STEP 2 Narrow Channel NOTE Gently touch test strip to the blood drop. Do not press or shake test strip too firmly aginst the finger.

  • Page 44: Alternative Site Testing (Ast)

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 3. Alternative Site Testing (AST) Important Information About AST Sites other than your fingertip may have fewer nerve endings so obtaining a blood sample from these sites may be less painful. The technique for Alternative Site Testing is different from fingertip testing.
  • Page 45 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Use Fingertip Testing ; • Within two hours after a meal • Within two hours after insulin dosing • Within two hours after physical activity • If you have a history of hypoglycemia, are experiencing low blood glucose, or...
  • Page 46 Prepare Your Lancing Device We recommend using the SD Lancing device with the clear end cap when testing from alternative sites other than the fingertip. You will find this item included with your kit.
  • Page 47 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Performing a Blood Glucose Test From an Alternative Site STEP-1 Remove the standard cap, insert the lancet, replace the standard cap with the AST clear cap (supplied) and prime the lancet device. Adjust the comfort level. STEP-2 The meter turns on in two ways.
  • Page 48 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM STEP-3 Press and vigorously rub the selected area for 10 seconds until it starts to feel warm to the touch. Wash the area with warm, soapy water. Rinse and dry completely. If you use...
  • Page 49 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Press the release button on the lancing device to lance the skin. Continue to hold the lancing device firmly against the skin until a blood drop forms. Once a large enough drop of blood has formed, remove the lancing device.
  • Page 50 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM STEP-5 The meter will count down and display the result after 5 seconds. Consider your result. and then repeat the Alternative Site Test if... • The blood sample appeared to be diluted with clear fluid •...

  • Page 51: Understanding Test Results

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 4. Understanding Test Results Your test results After the 5 seconds testing time has elapsed from applying blood onto the strip, you will receive a result, The result will be in the range of 10mg/dL to 600mg/dL (0.55mmol/L to 33mmol/L).
  • Page 52 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM If you set the pre-meal mark before testing, you will receive a result with pre- meal mark. ( If you set the post-meal mark before testing, you will receive a result with post- meal mark. (...
  • Page 53 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Normal Blood Glucose Readings The normal fasting blood glucose range for an adult without diabetes is 74 - 106 mg/dL(4.1 - 5.8mmol/L). Two hours after meals, the blood glucose range for an adult without diabetes is less than 140 mg/dL (7.7 mmol/L).

  • Page 54: Chapter 4 : Using The Meter Memory

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM CHAPTER 4 : Using the Meter Memory The meter automatically stores about 500 glucose results, letting you review them in order from the most recent to the oldest. If you have set the time/date feature, the time and date of the results are also displayed.

  • Page 55: Searching Test Results

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 1. Searching Test Results In Strip Stand-by Display, press the left arrow button to review in sequence from the most recent test result to the oldest test result stored in memory. [ Left button ]...
  • Page 56 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM [Control Solution result] The result with date and time will display for 1 second, then the date will change into the appropriate memory number automatically. If there are no stored test results, the following display will appear for 1 second.
  • Page 57 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM In Strip Stand-by Display, press the right arrow button to review three kinds of 7,14 and 30 day averages of the test result stored in memory in sequence. (normal, pre-meal and post-meal state) You can...
  • Page 58 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM If there are no stored 7, 14 and 30-day average of test results, the following display will appear on the LCD. You cannot search the stored test results and average results if a test strip is inserted in the meter.

  • Page 59: Downloading Results To A Computer

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 2. Downloading results to a computer You can use your meter with the SD Diabetes Management Software to store your records and to help you spot patterns for planning meals, exercise, and medication. The SD...

  • Page 60: Chapter 5 : Maintenance And Troubleshooting

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM CHAPTER 5 : Maintenance and Troubleshooting 1. Performing an SD Check strip Test When should I check my meter using the SD Glucose Check strip? • When you want to easily check the performance of the meter.

  • Page 61: Cleaning The Meter

    Message ] Message ] 2. Cleaning the meter Caring for the SD CodeFree™ meter is easy. To prevent malfunction of the meter, keep the meter and especially the test strip port free of blood, moisture, dirt or dust. If you need...

  • Page 62: Maintenance, Testing And Transportation

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 3. Maintenance, Testing and Transportation The meter needs little or no maintenance with normal use. It automatically tests its own systems every time you turn it on and lets you know if something is wrong. If you drop the meter or think it is not giving accurate results, make sure that your test strips haven’t...
  • Page 63 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM it in a dry and cool environment - do not store in direct sunlight. • After taking out the test strip from its container, close the container cap of the test strip immediately. •...

  • Page 64: Cleaning The Lancing Device

    4) Control solution If you are a medical professional or have the control solution in your possession please note the following. • Keep the SD Control Solution in a cool dry environment 8-30°C (46-86°F) . • Do not refrigerate or freeze. •...

  • Page 65: Screen Messages And Troubleshooting

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 5. Screen Messages and Troubleshooting Message Description • The meter turns on normally. [Strip Stand-by Display] • The meter is ready for you to insert a test strip. [Blood Stand-by Display] • The meter is ready for a drop of blood.
  • Page 66 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM • The meter is ready for a drop of blood with post- meal mark. • The meter shows the result of blood glucose strip test. • The meter shows three kinds of average results.
  • Page 67 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM [Post-meal Results Average] • The meter shows the saved results of blood glucose levels. • The meter is ready for a drop of control solution.

  • Page 68: Low Battery

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM [Low battery] When the battery is getting low the meter will show the low battery icon but you will still be able to carry out about 50 more tests. Replace the battery soon. See Chapter 1, “9.
  • Page 69 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM [Lo message] • Blood glucose may be lower than the measuring range of the meter. See chapter 3 “4. Understanding Test Results” [Internal Error Message for a meter] • Turn off the meter. Then turn on the meter again.
  • Page 70 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM [Blood Sample Error] • An insufficient amount of blood was applied. Discard this test strip and test again using a new test strip and a larger sample, making sure blood is placed to the narrow channel in the top edge of the test strip.

  • Page 71: Warnings, Precautions And Limitations

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 6. Warnings, Precautions and Limitations • Never make significant changes to your diabetes control program or ignore physical symptom without consulting with your healthcare professional. • Severe dehydration (excessive water loss) may cause false low results. If you believe...
  • Page 72 • Use only fresh capillary blood. Do not use serum or plasma or venous whole blood. • Do not use the SD CodeFree™ meter to test neonates. It has not been validated for neonatal use. • Always insert the test strip into the meter...

  • Page 73: Chapter 6 : Product Technical Information

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM CHAPTER 6 : Product Technical Information 1. System Specifications 10 - 600 mg/dL, Result Range (0.6 - 33.3 mmol/L) Plasma-equivalent Calibration Sample Fresh capillary whole blood Sample Size Minimum 0.9 microliter Test Time 5 seconds...
  • Page 74 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Memory 500 blood glucose tests - Hypo warning : 60, 70, 80 mg/ dL(3.3, 3.9, 4.4 mmol/L) - Pre-meal and post-meal mark - Alarm setting (up to 4 times) - Post-meal Alarm Function - 7-, 14- and 30-day Averages of...

  • Page 75: Electromagnetic Compatibility

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Electromagnetic Compatibility This meter meets electromagnetic immunity requirements as per EN ISO 15197 Annex A. The chosen basis for electrostatic discharge immunity testing was basic standard IEC 61000-4-2. In addition, the meter meets the electro-magnetic emissions requirements as per EN 61326.

  • Page 76: Annex 1 : Information For Healthcare

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Annex 1 : Information for Healthcare Professionals Healthcare professionals :Please follow the infection control procedures appropriate for your location. Decisions about whether recommend alternative site testing (AST) should take into account the motivation and knowledge level of the patient and his or her ability to understand the considerations relative to diabetes and AST.

  • Page 77: Annex 2 : Symbols Used

    SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Annex 2 : Symbol The following list describes all symbols used on the SD CodeFree™ Blood glucose monitoring (BGM) system. 1. Label Symbols for the meter Symbol Description Caution, consult accompanying documents Battery type used in this meter...
  • Page 78 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 2. Package Symbols for the BGM system Symbol Description Consult instructions for use IN VITRO DIAGNOSTIC MEDICAL DEVICE: This system is intended for use outside the body (in vitro diagnostic use). BATCH CODE: To indicate the lot number for this system.
  • Page 79 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM 3. Label Symbols for the test strip container Symbol Description IN VITRO DIAGNOSTIC MEDICAL DEVICE: This item is intended for use outside the body (in vitro diagnostic use). Consult instructions for use. USE BY: This item should be used by the given date.

  • Page 80: Annex 3 : References

    Blood Glucose Monitoring Devices, Oct 2003, Vol. 5, No. 5 : 749 -768 Annex 4 : Supplies and Accessories following supplies accessories are available from SD Biosensor, Inc. or the distributor. ITEM Cat No. 01GC110 SD CodeFree™ Blood Glucose meter / SD CodeFree™...
  • Page 81 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM ITEM Cat No. 01GM11 Meter SD CodeFree™ Blood Glucose meter 01GS11 SD CodeFree™ Blood Glucose test strip (25T x 2vial) Strip 01GS11B SD CodeFree™ Blood Glucose test strip (25T x 1vial) 01GCS10 Control SD Control Solution...
  • Page 82 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Return You must contact the medical professional or Company you purchased this meter from to obtain authorisation before returning your meter. Returned meters without this authorization will not be accepted.
  • Page 83 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM Manufactured by SD BIOSENSOR, Inc. C-4th&5th Floor Digital Empire Building 980-3, Yeongtong-dong, Yeongtong-gu, Suwon-si, Kyonggi-do, Korea EC-Representative...
  • Page 84 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM MEMO...
  • Page 85 SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM MEMO...
  • Page 86 For further information on please contact your SD BIOSENSOR, Inc. Representative 01GM11/01GC11 series C-4th&5th Floor Digital Empire Building 980-3, Yeongtong-dong, Yeongtong-gu, Suwon-si, Kyonggi-do, Korea TEL : +82-31-300-0400 FAX : +82-31-300-0499 www.sdbiosensor.com...
  • Page 87 BLOOD GLUCOSE MONITORING SYSTEM User Instruction Guide Coding...

Table of Contents