SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
10. Meter Set up
STEP-1 : Setting the Audible Beep
1.
In Strip Stand-by Display, press the ON/
OFF button for 3 seconds and the display
for setting the audible beep will be visible.
The spanner symbol is always shown when
in Setup mode.
2.
Set the audible beep on or off by pressing
either the left or the right button and then
selecting the preferred feature by pressing
the ON/OFF button. If you select the beep
on feature, a 'beep' sound is made at the
same time; otherwise, if you select the
beep off feature, no sound is made.
[ Left or right
button ]
[ Press and hold ]
for 3 seconds
[ ON/OFF
button ]
19