Ceiling Mode; Lens Control; Keystone; Dynamic Contrast - Barco PJWU-101B User Manual

11.Alignment

11.4 Ceiling Mode

The default setting is Off.
Whenyou have set up the projector for ceilingmode (hung from the ceiling in reverse), please set it to ON. Refer to
11.2 Adjusting screen

11.5 Lens Control

Zoom
Use this function to zoom in or zoom out the image size. Refer to
Focus
Use this function to adjust the image Focus. Refer to
Shift
Use this function to adjust the lens shift. Refer to

11.6 Keystone

Horizontal Keystone & Vertical Keystone
Use this function to correct keystoning caused by projection angle.
The summation of the absolute value of horizontal keystone and vertical keystone is limited to less than or
equal to 35°.

11.7 Dynamic Contrast

Use this function to configure the projector to automatically adjust image contrast from the source upon start up or shut
down. When activated, the projector will dynamically adjust the image contrast from the beginning of the projection until the
content has ended.
56
orientation
page 16: Lens
—>
—>
page 15: Lens zoom.
page 15: Lens focus
Shift.
page 55:
PJWU-101B 17/10/2014