DINION IP 7000 HD
Pin
1
2
3
4
Note:
If a short circuit is detected on the lens connector, the lens
circuit is automatically disabled to avoid internal damage.
Remove the lens connector and check the pin connections.
5.2
Mounting the camera
Notice!
Do not expose the image sensors to direct sunlight.
Do not obstruct the free flow of air around the camera.
The camera can be mounted either from the top or from the
bottom (1/4" 20 UNC thread).
Bosch Security Systems
DC iris lens
Damp -
Damp +
Drive +
Drive -
1/4"-20 UNC
Installation | en
2014.04 | v1.0 | AM18-Q0674
15