Standby Function; Auto Standby Function; Entering The Standby Mode Manually; Releasing The Standby Mode Manually - Fostex PX-5HS Owner's Manual

Standby function

Auto standby function

When the mode select switch is set to VOLUME
or TONE, the auto standby function is enabled.
When the auto standby function is enabled, if
there is no input signal for 4 hours, the unit auto-
matically enters the standby mode.
When the unit receives a signal, the standby
mode is released.
<Memo>: Depending on the source noise level or
the connection condition, the auto standby function
may not correctly work.
When the unit is in the standby mode, the
"FOSTEX" logo on the front panel flashes.
<Memo>: When the mode select switch is set to
OFF, the auto standby function is disabled.

Entering the standby mode manually

By long-pressing the [CONTROL] knob when the
mode select switch is set to OFF, you can turn
the unit to the standby mode.
This feature would be useful when you go
outside the listening room for a while.

Releasing the standby mode manually

When the unit is in the standby mode, pressing
the [CONTROL] knob releases the standby mode
and returns to the normal condition.

Parameter lock function

When the mode select switch is set to OFF, the
parameter lock function is enabled and the unit is
in the following conditions.
• You cannot change the setting values.
• The auto standby function is disabled.
E-6