Quick Start Guide - Dish Network HDTV User Manual

Quick Start Guide

After your system has been installed, order and watch your programming using
the following steps:
Step 1: Ordering Your Programming
1. Using your remote control, press SAT, and then press the blank
POWER button. Make sure the TV is also on.
2. Press GUIDE. You will see that some channels in the
Program Guide
viewed immediately. However, many channels will be in red.
You cannot view these channels until you order programming.
3. Press the SYSTEM INFO button on the receiver's front panel to display the
screen.
System Info
: The screen shown here is just an example. You will see numbers and
Note
information for your receiver.
4. Call the Customer Service Center at 1-800-333-DISH (3474). A customer
service representative will discuss the various programming packages
available.
5. Choose a package and the representative will authorize your programming.
6. Select
Cancel
appear in white. These channels can be
to close the
System Info
screen.
Quick Start Guide
Tip: Channels that
appear in red can't
be viewed because
they are not part of
your subscription.
You can add
channels to your
subscription
simply by calling
DISH Network at
1-800-333-DISH.
Page 3