Dish Network HDTV User Manual page 32

Chapter 2
Receiver Description and Installation
Page 28
2. Use the Scan Analog
automatically or select the
Guide
Channel Setup menu. This opens the
3. Enter the channel number in the
Note : Be sure to enter two digits. For single digit numbers, place a zero in
front of it.
4. To assign the channel to one of the major broadcast networks, select an
option. Or, select the
Affiliation
the channel to a broadcast network.
5. To edit the name of the channel, select the
Local Channel Name
6. Highlight a letter and press the SELECT/OK button.
7. Do this again to spell out the channel name. You can enter up to five
characters. If you need to, use the
option to correct a letter. When you are done entering the channel
<BACK
name, select the Save
menu again.
Setup
8. Repeat the above steps 3 through 7 if you want to add another local analog
channel.
9. To delete one or more channel(s), select the channel(s) in the
and then select the
Remove
selection to add the local channels to the
Add Analog
Add Local Analog Channel
field.
Ch. Num
option if you do not want to assign
None
Save
menu:
option to insert a space or the
SPACE
option. The receiver displays the
option.
Program
option on the
Local
menu.
option. This opens the Edit
Local Channel
Channels
list