Zoom and Focus Adjustment
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Ring to adjust the focus of the image.
Keystone Correction
If a projected picture has keystone distortion, correct
the image with Keystone adjustment.
It is not available when On-Screen menu is displayed.
Press the KEYSTONE button on the top control or on
the remote control. The keystone dialog box appears.
Correct keystone distortion by pressing the Point
▼
buttons on the top control or on the remote control.
Keystone adjustment can be memorized. (p.43)
Reduce the upper width
▲
with Point
button.
Reduce the lower width
▼
with Point
button.
• The white arrows indicate that there is no
correction.
• A red arrow indicates the direction of
correction.
▲
• An arrow disappears at the maximum
correction.
• If you press the KEYSTONE button on
the remote control once more while the
keystone dialog box is being displayed, the
keystone adjustment will be canceled.
• The adjustable range is limited depending
on the input signal.
Top Control
PC
Remote Control
Basic Operation
Zoom Lever
Focus Ring
KEySTONE
button
▲▼
POINT
buttons
KEySTONE button
▲▼
POINT
buttons
3