Aluminum Wheels (If Equipped); Bumpers And Side Moldings; To Prevent Paint Deterioration And Body Corrosion; Precautions Regarding The Exhaust Pipe - Toyota 4RUNNER Owner's Manual

Aluminum wheels (if equipped)

n
Remove any dirt immediately by using a neutral detergent. Do not use hard
brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners.
Use the same mild detergent and wax as used on the paint.
n

Bumpers and side moldings

Do not scrub with abrasive cleaners.

To prevent paint deterioration and body corrosion

n
l Wash the vehicle immediately in the following cases:
• After driving near the sea coast
• After driving on salted roads
• If coal tar or tree sap is present on the paint surface
• If dead insects, insect droppings or bird droppings are present on the
paint surface
• After driving in an area contaminated with soot, oily smoke, mine dust,
iron powder or chemical substances
• If the vehicle becomes heavily soiled with dust or mud
• If liquids such as benzene and gasoline are spilled on the paint surface
If the paint is chipped or scratched, have it repaired immediately.
l
CAUTION
When washing the vehicle
n
Do not apply water to the inside of the engine compartment. Doing so may
cause the electrical components etc. to catch fire.
n

Precautions regarding the exhaust pipe

Exhaust gasses cause the exhaust pipe to become quite hot.
When washing the vehicle, be careful not to touch the pipe until it has cooled
sufficiently, as touching a hot exhaust pipe can cause burns.
4RUNNER_U
4-1. Maintenance and care
479
4