Programming An Entry Gate (For U.s. Owners)/Programming A Device In The Canadian Market; Programming Other Devices; Reprogramming A Button - Toyota 4RUNNER Owner's Manual

3-7. Other interior features
Programming an entry gate (for U.S. owners)/Programming a
n
device in the Canadian market
Place the remote control transmitter 1 to 3 in. (25 to 75 mm)
STEP 1
away from the HomeLink
Keep the HomeLink
Press and hold the selected HomeLink
STEP 2
Repeatedly press and release (cycle) the remote control
STEP 3
transmitter for 2 seconds each until step 4 is completed.
When the HomeLink
STEP 4
release the buttons.
Test the HomeLink
STEP 5
grammed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for any of
STEP 6
the remaining HomeLink
n

Programming other devices

To program other devices such as home security systems, home
door locks and lighting, contact your Toyota dealer for assistance.
n

Reprogramming a button

The individual HomeLink
reprogrammed. To reprogram a button, follow the "Reprogramming
a HomeLink
466
4RUNNER_U
®
buttons.
®
indicator light in view while programming.
®
indicator light starts to flash rapidly,
®
operation by pressing the newly pro-
®
buttons.
®
buttons cannot be erased but can be
®
button" instructions.
®
button.