Steering Lock; Steering Lock Motor Overheating Prevention; When The “Engine Start Stop” Switch Indicator Flashes In Amber - Toyota 4RUNNER Owner's Manual

Hide thumbs Also See for 4RUNNER:
Table of Contents

Advertisement

2-1. Driving procedures
If the engine does not start
n
The engine immobilizer system may not have been deactivated. (→P. 106)

Steering lock

n
After turning the "ENGINE START STOP" switch off and opening and closing
the doors, the steering wheel will be locked due to the steering lock function.
Operating the "ENGINE START STOP" switch again automatically cancels
the steering lock.
When the steering lock cannot be released
n
n

Steering lock motor overheating prevention

To prevent the steering lock motor from overheating, the motor may be sus-
pended if the engine is turned on and off repeatedly in a short period of time.
In this case, refrain from operating the engine. After about 10 seconds, the
steering lock motor will resume functioning.
n
When the "ENGINE START STOP" switch indicator flashes in amber
The system may be malfunctioning. Have the vehicle inspected by your
Toyota dealer immediately.
If the electronic key battery is depleted
n
→P. 528
170
4RUNNER_U
The green indicator light on the "ENGINE
START STOP" switch will flash. Press the
"ENGINE START STOP" switch again
while turning the steering wheel left and
right.
CTH21AS019

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents