Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Felt Manuals
  4. Bicycle
  5. Edict Nine
  6. Manual manual

Felt Edict Nine Manual Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Edict Nine Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the Edict Nine and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Felt Edict Nine

Summary of Contents for Felt Edict Nine

  • Page 1 Edict Nine Manual...
  • Page 2 Congratulations on purchasing this high quality Felt bicycle. As with all of our bikes Felt recommends that you start with between 20 and 30 percent sag to get optimal and components, our aim is to provide you, the rider, with the best possible product performance from your Felt Edict Nine.
  • Page 3 4. Maintenance Overview: While all Felt frames are designed to be strong and durable, a little preventive 3. If the suspension moves smoothly through its travel, check for any side to side maintenance will protect your investment and provide endless hours of trail riding fun.

  • Page 4: Bearing Replacement

    Note: Not all tools from the master tool kit will be needed for this model beginning. Doing so will save you time in the long run and help keep your Felt frame of Felt Bicycle and may not be included in your bike’s tool kit.
  • Page 5 C) Assemble the rest of the tools as seen in Fig. 6. Removing Bearings: Alloy Model Instructions D) As you tighten the bolt the Split Bearing Puller will draw the bearing into the Bearing Receiver (U). Repeat for both bearings in the Left and Right dropouts. 1.
  • Page 6 Alloy Model Instructions Alloy Model Instructions 3. To install the first new bearing into the Seat Tube Pivot orient the tools as shown in 6. To reassemble the Dropout Pivot, orient the tools as shown in Fig. 11. Tighten the Fig.
  • Page 7 Removing Bearings: Frame Reassembly: Carbon Fiber Model Instructions Alloy Model Instructions 1. To remove the Main Pivot Bearings, insert the 15mm Split Bearing Puller (tool “V”) into one bearing in the front triangle. You should feel it “snap” into place between (Note: use Anti-Seize Lubricant on all Titanium hardware) the bearing and the internal spacer.
  • Page 8 Installing Bearings: Carbon Fiber Model Instructions Carbon Fiber Model Instructions 1. Once all the bearings have been removed, clean the bearing bores using the 3. To install the first new bearing into the Seat Tube Pivot orient the tools as shown in dental pick or X-acto knife to remove all traces of old bearing seating compound/ Fig.
  • Page 9 4. Once the Shock Links are tightened to the Seatstay Yoke, tighten the Shock Link If you are the slightest bit unsure… If you have any doubts about the integrity of any part of your Felt bolts, installed in step 2, to the torque specified on the links, or 11Nm.
  • Page 10 Edict Nine Alloy Series Parts Illustration Edict Nine Alloy Series Parts List: QTY / Bike Derailleur hanger DU1310 (13mm ID x 10mm Lg.) 6801-2RS MAX Bearing 12x21x5 M6x40 SHCS M6x20 SHCS Acetyl Thrust Washer Link Axle Seatstay Pivot Axle O-Ring...
  • Page 11 Edict Nine Carbon Series Parts Illustration Edict Nine Carbon Series Parts List QTY / Bike Derailleur hanger DU1310 (13mm ID x 10mm Lg.) 6801-2RS MAX Bearing 12x21x5 M6x40 SHCS M6x20 SHCS Acetyl Thrust Washer Link Axle Seatstay Pivot Axle O-Ring...
  • Page 12 Felt Racing, LLC Industriestr. 39 12 Chrysler 26188 Edewecht Irvine, CA 92618 Germany www.feltbicycles.com...