INTRODUCTION INTRODUCTION VR SERIES Geometry ....................2 Congratulations on purchasing a VR Series. As with all of our bikes and components, our aim is to provide the rider with the SETUP best product and riding experience. Read this manual supplement Head Tube Cable Guides ................
Page 3
GEOMETRY HEAD TUBE CABLE GUIDES The head tube cable guides contain rubber reducers for all cable sizes that are interchangeable and can be arranged to fit each rider's setup and personal preferences. Size 70.3 71.3 72.5 72.5 72.5 72.5 Head Tube Angle 75.3 74.7 74.5...
ROUTING ROUTING FRONT BRAKE 1x11 FULL HOUSING It is best to route the cable from the bottom up. Begin by inserting the end of the cable into the lower hole, feeding the cable through the fork blade toward the upper hole. IMPORTANT To allow for full range of handlebar movement, it’s...
Page 6
ROUTING ROUTING BOTTOM BRACKET BOTTOM BRACKET CABLE GUIDE CABLE GUIDE Thread the supplied cable liners over each cable. This will keep the cable liners Now replicate this step on the drive side for the rear derailleur cable. This cable will from crimping and creating friction during the routing process.
Page 7
ROUTING ROUTING BOTTOM BRACKET BOTTOM BRACKET CABLE GUIDE CABLE GUIDE Once the cables have been crossed over each other once, carefully insert the Take the front derailleur cable and thread through and under the circled bridge in cable guide while making sure not to pinch the cables. The front derailleur cable the cable guide.
Page 8
ROUTING ROUTING BOTTOM BRACKET BOTTOM BRACKET CABLE GUIDE CABLE GUIDE Once the cable has been successfully threaded through, pull it tight while making While keeping a small loop in the cable on outside of the bottom bracket guide, sure the remaining cable doesn’t crimp while the loops disappear as the cable is begin to thread the cable through the circled hole and into the chainstays.