Also [Intelligent Iso]; [Sensitivity] - Panasonic Lumix DMC-FS5 Operating Instructions Manual

Table of Contents

Advertisement

Advanced (Recording pictures)
_Note
• The ends of the recorded pictures may be cut at printing so check before printing. (P102)
For details on [REC] mode menu settings, refer to P19.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
G)
• The upper limit of the ISO sensitivity can be set.
• The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
_Note
• Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
• Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
• To avoid picture noise, we recommend decreasing maximum ISO sensitivity level or setting
[COLOR MODE] to [NATURAL]. (P66)
For details on [REC] mode menu settings, refer to P19.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Applicable modes:
G)
[AUTO]/[1 00]/[200]/[400]/[800]1[1600]
ISO sensitivity
100~~=~
1600
Recording location
When it is light (outdoors)
When it is dark
(recommended)
Shutter speed
Slow
Fast
Noise
Less
Increased
_Note
• When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of [IS0400]
according to the brightness. (It can be adjusted to a maximum of [IS01 000] when using the
flash.)
• The sensitivity automatically switches to between [IS01600] and [IS06400] in [HIGH SENS.] in
scene mode.
·The setting is not available when [INTELLIGENT ISO] is being used. ([I1DJ] is displayed.)
• To avoid picture noise, we recommend that you either reduce the maximum ISO sensitivity level
or set [COLOR MODE] to [NATURAL], and then take pictures. (P66)
VQT1M97
61

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-fs3

Table of Contents