Panasonic Lumix DMC-FS5 Operating Instructions Manual page 84

Connecting to other equipment
Double-click on [Removable Disk] in [My Computer].
• When using a Macintosh, the drive is displayed on the desktop. ("LUMIX", "NO_NAME"
or "Untitled" is displayed.)
Double-click [DCIM] folder.
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pictures to any different folder on
the PC.
• Disconnecting the USB connection cable safely
• Proceed with the hardware removal using "Safely Remove Hardware" on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the
digital camera before removing the hardware.
Note
• Do not use any other USB connection cables except the supplied one.
• Turn the camera off before connecting or disconnecting the AC adaptor (optional: DMW-AC5PP).
• Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
• With the Mac OS X v1 0.2 or an earlier operating system, set the Write-Protect switch of the
SDHC memory card to the [LOCK] position when importing pictures from an SDHC memory
card .
• Viewing the contents of the built-in memory or card using the PC (folder
composition)
Motion pictures
DPOF print
Favorite
100_PANA
P1000001.JPG
~~
e e
P1000002.JPG
P1000999.JPG
101_PANA
o
Folder number
e
File number
o
JPG: Pictures
MOV:
MiSe:
A new folder is created when pictures are taken in the following situations.
• After [NO.RESET] (P23) in the [SETUP] menu has been executed
• When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
• When there is a picture with file number 999 inside the folder
84
VQT1M97