R:b [Color Mode]; Uii: [Stabilizer] - Panasonic Lumix DMC-FS5 Operating Instructions Manual

Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P19.
Using these modes, the pictures can be made sharper or softer, the colors of the pictures
can be turned into sepia colors or other color effects can be achieved.
Applicable modes:
Li8)G1m
[STANDARD]:
[NATURAL]:
[VIVID]:
[81W]:
[SEPIA]:
[COOL]:
[WARM]:
This is the standard setting.
The picture becomes softer.
The picture becomes sharper.
The picture becomes black and white.
The picture becomes sepia.
The picture becomes bluish.
The picture becomes reddish.
Jitter is always compensated during [REG] mode.
The jitter is compensated for when the shutter button is pressed.
_Note
- When you take pictures in dark places, noise may become visible. To avoid noise, we
recommend setting to [NATURAL].
- You cannot set [COOL] or [WARM] in intelligent auto mode. Also, you cannot set [NATURAL] or
[VIVID] in motion picture mode.
- Different color modes can be set in different [REC] modes.
For details on [REC] mode menu settings, refer to P19.
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
Applicable modes:
Li8)G1l1l1m
[OFF]
[MODE1]:
[MODE2]:
ONate
- The stabilizer function may not be effective in the following cases.
- When there is a lot of jitter.
- When the zoom magnification is high.
-In digital zoom range.
- When taking pictures while following a moving subject.
- When the shutter speed becomes slower to take pictures indoors or in dark places.
Be careful of camera jitter when you press the shutter button.
• The setting is fixed to [MODE2] with [SELF PORTRAIT] in scene mode and to [OFF] in
[STARRY SKY] in scene mode.
-It cannot be set to [OFF] in the Intelligent auto mode.
-In motion picture mode, [MODE2] cannot be set.
66
VQT1M97