A [Quality]; [Aspect Ratio]; [Intelligent Iso] - Panasonic DMC-FX37 Operating Instructions Manual

For details on [REC] mode menu settings, refer to P18.
Set the compression rate at which the pictures are to be stored.
Applicable modes:
[A]:
Fine (when giving priority to the picture quality)
[›]:
Standard (when using the standard picture quality and increasing the number of
pictures to be recorded without changing the number of pixels)
Note
•
Refer to P112 for information about the number of recordable pictures.
For details on [REC] mode menu settings, refer to P18.
This allows you to select the aspect ratio of the pictures to suit printing or the playback
method.
Applicable modes:
[X]:
[ASPECT RATIO] of a 4:3 TV
[Y]: [ASPECT RATIO] of a 35 mm film camera
[W]: [ASPECT RATIO] of a high-definition TV, etc.
[X]
Note
•
The ends of the recorded pictures may be cut at printing so check before printing. (P110)
For details on [REC] mode menu settings, refer to P18.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
[OFF]/[ ]/[
ISOMAX ISOMAX
400 800
•
The upper limit of the ISO sensitivity can be set.
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
Note
•
Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
•
Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
•
To avoid picture noise, we recommend decreasing maximum ISO sensitivity level or setting
[COLOR MODE] to [NATURAL]. (P65)
Downloaded From camera-usermanual.com Panasonic Manuals

A [QUALITY]

·¿

? [ASPECT RATIO]

ñ·¿

[INTELLIGENT ISO]

·
]/[ ]
ISOMAX
1600
[Y]
Advanced (Recording pictures)
[W]
VQT1R87
59