CDX-M850MP
2-4. MOTOR BLOCK ASSY, CAM (R) ASSY
Note : Install the motor block assy and cam (R) assy in this roder.
For phase alignment between cams (L) and (R), see page 15 and 17.
5 motor block assy
3 CNP902
2-5. MAIN BOARD
10
4 PTT 2.6x6
5 MAIN board
3 PTT 2.6x6
ground point
1 PTT 2.6x6
Note: Install the cam (R) assy with
the cam fully rotated in the
direction of the arrow A .
A
2 cam (R) assy
4 PTT 2.6x6
ground point
1 PTT 2.6x6
2 PTT 2.6x6