Samsung SCD-2082 User Manual page 26

Setup
MOTION DET : This product has a feature that allows
1
When the SPECIAL menu screen is displayed,
press the Function Setup switch so that the
arrow indicates 'MOTION DET'.
2 Set up the mode using the Function Setup switch.
AREA£ º
SENSITIVITY£ º
M OTION DET areas show only MOTION DET menu. Therefore, MOTION DET areas don't

display on the monitor screen.
 syNC : In areas where the supply is at
60Hz(NTSC), 50Hz(PAL), you can
synchronize the output phase of multiple
cameras using the power synchronization
function (Line-Lock) without using a
synchronization signal generator.
- INT: Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
 Press the Function Setup switch.
 You can select a desired phase from 0 to 359 when select 'phase'.
 When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L type
synchronization.
When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.

 COaX : COAX option is set to "On" will specify the use of coaxial communication.
26_ Setup
you to observe movement of objects
in 4 different areas on the screen,
and the words 'MOTION DETECTED'
appear on the screen when movement
is detected. You can monitor activity
more efficient.
You can select up to 4 MD areas.
Determines whether to use the MD area selected in AREA.
Adjust the sensitivity of MD. the lower level, the higher sensitivity.
Select this to save the MOTION DET menu settings and return to the SPECIAL
menu.
 1.AREA
2.MODE
3.TOP
4.BOTTOM
5.LEFT
6.RIGHT
7.SENSITIVITY
8.RETURN
Adjust the area to be enhanced.
▶ PHASE
AREA1
IIIIIIIIIIIIIIIIIIIII

IIIIII IIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIIIII

IIIIII IIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIII III

SYNC
*IIIIIIIIIIIIIIIIIIIII
Press SET to Return
ON
4
15
9
46
4
0