Samsung SCD-2082 User Manual page 22

Setup
BACKLIGHT
The SCD-2082 is designed to deliver a distinctive subject and background at the
same time, even when the subject is backlight, by adopting
W6 DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the
Function Setup switch so that the arrow indicates BACKLIGHT .
2. Select a desired mode using the Function Setup switch depending on the camera
purpose.
UseR blC : Enables a user to directly

- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HlC (High light Compensation) :

This function masks the strong light to
minimize white out due to over exposure and
preserve much of the on-screen details when
the camera aims a strong light source.
- LEVEL : Adjusts the brightness level of a
LIMIT :
-
- MASK COLOR :
Off : Not being used

This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'SSNR3' by using the Function
Setup switch so that the arrow indicates 'SSNR3'.
2. Select a desired mode using the Function Setup
switch.
 Off : Deactivates SSNR3. Noise is not reduced.
 ON : Activates SSNR3 so that noise is reduced.
22_ Setup
select a desired area from a
picture, and to view the area
more clearly.
monitoring area.
Enable to change the operating condition.
Change the color of the masking area. (Black, Red, Blue, Gray, Magenta)
a function of the proprietary
BLC SETUP
▶ 1.LEVEL
2.TOP IIIII  IIIIIIIIIIIIIIII
3.BOTTOM IIIIIIIIIIIIIIIIII  III
4.LEFT IIIIII  IIIIIIIIIIIIIII
5. RIGHT IIIIIIIIIIII IIII
6. RETURN
HLC SETUP
▶ 1. LEVEL
2. LIMIT
3. MASK COLOR
4. RETURN
SSNR3
IIIIIIII IIIIII
▶ LEVEL 1.

2.
RETURN
MIDDLE
9
23
40
 IIIII 81
MIDDLE
NIGHT ONLY
BLACK
22
IIIIIIIIIII