Table of Contents
Advertisement
3. Set the SSNR3 mode to 'ON' and press the Function Setup switch.
4. Then you can adjust the noise reduction level.
You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE
menu is 'OFF'.
When adjusting the noise reduction level of the SSNR3 mode, remember that the higher
the level set, the more the noise level will be reduced but that after image may also occur.
DAY/ NIGHT
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' by using the Up
and Down buttons so that the arrow indicates 'DAY/NIGHT'.
2. Select a desired mode using the Left and Right buttons according to the picture display
you want.
: The mode is switched to 'Color' in a
AUTO
normal environment,but switches to 'B/W'
mode when ambient illumination is low. To set
up the switching time for AUTO mode, press
the Function Setup switch. You can turn on or
off the burst signal on B/W mode.
- DWELL TIME : Y
↑ 3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
- BURST MODE : You can turn on or off the burst mode on B/W mode.
COlOR : The picture is always displayed in color.
b/W : The picture is always displayed in black and white. You can turn on or off the
burst mode on B/W mode.
SPECIAL
1. When the SETUP menu screen is displayed, select 'SPECIAL' by using the Function
switch so that the arrow indicates 'SPECIAL'.
2. Select a desir
ed mode using the Function Setup
switch.
ou can select the duration time about changing the day/night mode.
AUTO SETUP
▶ DWELL TIME
BURST MODE
Press SET to Return
SPECIAL
▶ 1.IMAGE ADJ
2.CAM TITLE
3.
PRIVACY
4.
5.
SYNC
COAX
6.
SSDR
7.
8.RETURN
5 SEC
ON
Setup
OFF
OFF
OFF
INT
OFF
ON
English_23
Advertisement
Table of Contents
