Roberts R881 User Manual page 14

3. Whilst the real time symbol is flashing, set the
correct time by pressing the numbered buttons. As you
press each button the corresponding number will show
on the display.
4. Press the "Enter" button to complete time setting. If
an incorrect time has been set the radio will beep and
the symbol will appear in the display. Reset
the correct time by pressing the numbered buttons
again.
Note:
a. Time can only be adjusted whilst the
time symbol is flashing in the display.
b. Time should be entered in 24 Hr format e.g. 3:00pm
should be entered as 15:00.
c. After time setting is complete 12 Hr clock mode
may be selected by pressing the "12/24Hr" select
button.
12
real