3. Press the numbered button corresponding to the pre-
set memory location for the required station. The ra-
dio will instantly tune to the station and the display will
show its frequency and memory location. If you wish
to select another preset station press any one of the
numbered buttons for instant access.
e.g. preset 12 can be selected by pressing the numbered
button '1' followed by the numbered button '2'.
Note :
1. The exception to the above instruction is preset number
one. To select preset one press the numbered button
'1' followed by the enter key.
If you need any further advice, please call our Technical Helpline on :-
0181 758 0338 (Mon-Fri)
33