Advertisement
if a single user door strike code has been created by your installer then user number
28 is dedicated to that function.
Please check with your installer to determine whether any of these spedal purpose
users codes exist.
Example,
To create user number 13, with a user access code of 4567, (assume a master user
code of 1234), enter;
CODE 1234 13 4667
Any error detected during the USER definition process will cause the
keypad to beep rapidly four times. If an error is detected retry the entire
command.
13.
USER DELETION
Removal of users from the panel can be performed as follows;
USER DELETION PROCEDURE:
CODE [USER] [User number ] #
Where:
[USER]
Master user code
[User number ] Represents the user number being deieted.(03-30). Note: Master
users (User number 1 or number 2) cannot be deleted.
#
is the # key from the keypad.
Example, Delete user number 26 (assume master user code of 6789)
CODE 6769 26 I
14.
KEYPAD EMERGENCY CONDITIONS
The XL461 2 can also initiate three separate emergency conditions directly through
the keypad. These conditions must be activated by your installer and can be initiated
through simultaneous depression of two keys as follows:
DFSCRIPTION
KEYSTROW
Panic
l
#
Fire
7 9
Aux.
1 3
For example, to initiate a keypad panic signal press the
l
and # keys at the same time.
Consult with your alarm installer to determine the operation of these conditions within
your system.
15. DURESS
The STAR XL4612 system has capability to send an emergency signal to the
a
Central Station if you are forced to enter the premise. This ambush capability can be
programmed by your installer. lf active, then user code number 30 will be your ambush
code.
16.
ARM-ONLY (MAID1 CODE
Another option selectable by your installer is an arm only code. If selected then user
code number 29 can only arm the system. This could be useful for a maid or
maintenance worker to allow them to activate the security system as they leave.
Advertisement
