Download Print this page

Fire Burglqry XL STAR 4612 Owner's Manual page 5

Advertisement

4.
KEYPAD CONVENTIONS
Throughout this users manual the following conventions are used to display the
keystrokes required to perform the functions.
BYPASS
Key labeled BYPASS on keypad.
INSTANT
Key labeled INSTANT on keypad.
STAY
Key labeled STAY on keypad.
CODE
Key labeled CODE on keypad
[USER]
Four digit user code:
5.
ARMING THE SYSTEM
ARMING the system will activate all portions of your Security System. Arming can
only be performed if ail zones are READY. For example, if a protected door is open the
system cannot be armed.
SYSTEM READY
The system Is ready to be armed if the READY indicator light ON.
On LCD keypads the following display will appear:
PYSTEU
if the system is ready, ARMING can be performed as follows;
ARMING PROCEDURE:
1. Enter your four digit user code into the keypad:
WERj
The ARMED indicator light will now be lit and if you are leaving the home you may
exit through a door designated by your installer as an exit/entry zone for a fixed time
period known as the exit delay.
The entry exit times for your system are as follows;
ENTRY:
seconds- EXIT:
seconds
LCD keypads will display the following message;
fmy
NOTE: The system can be armed without the backup battery connected.
SYSTEM NOT READY
if the system is not ready to be armed the READY indicator will be OFF. On LED
based keypads the zone indicator lights will display the zones which are currently not
ready. The condition of each zone indicator reflects the status of each zone as follows;
ALARM
Fast blinking.
BYPASS
Slow blinking low intensity.
TROUBLE
Slow pulse
NOT READY
Solid ON
The LCD keypad a display will appear indicating that the system is not ready followed
by displays showing the zone number and description of the zone or zones which are
not ready. For example:
t!2mmiy
In this example, the front door is not ready (Zone 1).
in order to make the system ready determine which zones are not ready by observing
the zone indicator lights, or the display section of the LCD keypad. From the zone
number you can find out which area of protection is not ready.

Advertisement

loading