Advertisement
7.
STAY
The STAY mode is another way to ARM your system while you remain in the
location. The STAY mode will deactivate any interior protection zones which means
that you w/Ii be free to walk throughout your location without activating the alarm
system.
In order to enter the STAY mode, the system must be READY. (see previous
description).
STAY PROCEDURE:
STAY [USER]
Depress the STAY key followed by your user code.
After a successful STAY arming the ARMED indicator will be lit. In addition, on the
XL461 2RM keypad the RDY indicator will slowly blink. On the XL4800LED keypad the
STAY indicator wlli be lit.
On the XL48OOLCD keypad the following display will appear:
m
in the STAY mode only the external or perimeter burglary protection is active. You are
free to walk around the residence without activating any of the interior protection zones
>>
.
Remember, you must DISARM the system to when you want to leave the
premise.
Note: The STAY option will automatically be reset after the system is disarmed.
8.
INSTANT
The INSTANT mode arms the system and eliminates the entry time delay interval.
This mode could be used so that if anyone enters through an entry/exit zone the alarm
system will instantly activate.
The system must be ready to select the INSTANT option.
INSTANT PROCEDURE:
INSTANT [USER]
Depress the INSTANT key followed by your user code.
Upon successful INSTANT ARMING of the system the ARMED indicator will be lit.
in addition, the XL461 2RM keypad the RDY light will blink (NOTE: This blink is slightly
faster than the indication for the STAY mode). On the XL4800LED keypads the instant
indicator will be ON.
The XL48OOLCD keypad will contain the following message;
Note: The INSTANT option will automatically be reset after the system is disarmed.
9.
INSTANT - STAY
The INSTANT STAY mode will arm the system with the characteristics of both the
INSTANT and STAY modes. The system will be armed with the interior portions
bypassed and the entry delay will be suspended.
The system must be READY in order to enter this mode.
PROCEDURE:
INSTANT STAY [USER]
my
LTANT
[USER]
Depress the INSTANT and STAY keys in any order followed by your user code.
After a successful INSTANT STAY arming the ARMED indicator will be lit.
Advertisement
