Electrical Connections; Ds8100 Connectors - Datalogic DS8100 Installation Manual

DATALOGIC

2.5 ELECTRICAL CONNECTIONS

2.5.1 DS8100 Connectors

The DS8100 Serial Interface version is equipped with 4 connectors for the
following signals:
Aux. Interface/Input Signal connector A
Aux. Interface/Input Signal connector B
Output Signal connector
Main Interface connector
Aux. Interface/Input Signal Connector A
A1
Figure 2.6 - Aux. Interface/Input Signal connector A (male)
Aux. Interface/Input Signal Connector A pinout
Pin Name
A1 GND
A2 VS
1 GND485
2 NC
3 NC
4 NC
5 NC
6 NC
7 NC
8 RXTX485+
9 RXTX485-
10 ENC+
11 ENC-
12 PS2+
13 PS2-
14 PS1+
15 PS1-
(male, 17 pins)
(female, 17 pins) (Figure A,
(female, 9 pins) (Figure A,
(female, 9 pins) (Figure A,
1
A2
15
Function
Ground
Power Supply
RS485 Ground Reference
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Positive Transmit/Receive
Negative Transmit/Receive
Encoder signal (Positive pin)
Encoder signal (Negative pin)
Presence Sensor 2 signal (Positive pin)
Presence Sensor 2 signal (Negative pin)
Presence Sensor 1 signal (Positive pin)
Presence Sensor 1 signal (Negative pin)
Installation — DS8100 Serial Interface – 2.7
(Figure A,
scanner side
external view
DS8100
).
13
).
14
).
16
).
15