Manual Liftgate; Liftgate Ajar Signal - Lincoln Navigator Owner's Manual

Hide thumbs Also See for Navigator:
Table of Contents

Advertisement

Available languages

Available languages

Driver Controls
2. Power open the liftgate by using the keyfob or overhead console
button.
3. Once the liftgate is fully open, close the liftgate using the keyfob or
overhead console button.
Note: If the power liftgate system is turned <OFF> in the message
center, the system can not be activated with any switches or with the
liftgate handle. The system will need to be turned <ON> for any power
operation to occur.

Liftgate ajar signal

If the liftgate or liftgate glass are not fully latched, you will receive a
"LIFTGATE AJAR" message on the instrument panel. If you see this
message, check both the liftgate glass and liftgate door to insure they are
fully latched.
Make sure the liftgate is closed to prevent exhaust fumes from
being drawn into the vehicle. If you must drive with the liftgate
open, keep the vents open so outside air comes into the vehicle.
MANUAL LIFTGATE (IF EQUIPPED)
To open the rear window, push the
button on the left side of the liftgate
handle above the license plate.
To open the liftgate, pull the liftgate
handle.
• Do not open the liftgate or
liftgate glass in a garage or other
enclosed area with a low ceiling.
If the liftgate glass is raised and
the liftgate is also opened, both
liftgate and glass could be damaged against a low ceiling.
• Do not leave the liftgate or liftgate glass open while driving. Doing so
could cause serious damage to the liftgate and its components as well
as allowing carbon monoxide to enter the vehicle.
Make sure that the liftgate door and/or window are closed to
prevent exhaust fumes from being drawn into the vehicle. This
will also prevent passengers and cargo from falling out. If you must
drive with the liftgate door or window open, keep the vents open so
outside air comes into the vehicle.
166

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents