Extron electronics DVI 104 Tx Setup Manual page 6

•
•
•
Screen is distorted or displays noise
•
•
•
•
•
Extron USA - West Extron USA - East
Headquarters
+800.633.9876
+800.633.9876 Inside USA / Canada Only
Inside USA / Canada Only
+1.919.863.1794
+1.714.491.1500 +1.919.863.1797 FAX
+1.714.491.1517 FAX
Ensure that the transmitter is firmly plugged into the source
device and the receiver is firmly plugged into the output device.
Try resetting the system by unplugging and reconnecting the DVI
connectors or the power jacks.
Try rebooting the computer.
Ensure that the cable length does not exceed
Ensure that the cables are high quality multimode cable and are
terminated with securely fitting plugs.
Ensure that the resolution is correctly set, using the EDID Minder
(see "Setup and Operation").
View the "Display Properties" of the source device to check the
output resolution. The resolution and refresh rate must match the
capabilities of the display device and must not exceed 1920 x 1200
at 60 Hz.
Try resetting the system by unplugging and reconnecting the DVI
connectors or the power jacks.
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
© 2009 Extron Electronics. All rights reserved.
Extron Asia Extron Japan
+800.7339.8766 +81.3.3511.7655
Inside Asia Only +81.3.3511.7656 FAX
+65.6383.4400
+65.6383.4664 FAX
1,640' (500 m).
Extron China Extron Middle East
+400.883.1568 +971.4.2991800
Inside China Only +971.4.2991880 FAX
+86.21.3760.1568
+86.21.3760.1566 FAX
6