Advertisement
Congratulations on your choice of stereo power amplifiers - you have purchased one of the finest
stereo amplifiers on the market today. This unit was developed using the expertise of professional sound
engineers and working musicians. You will find that your new A Series has superior performance and
greater flexibility than any other amplifiers in its price range. Please read this manual carefully to get the
most out of your new unit. Thanks for selecting A Series as your choice in stereo power amplifiers.
What's in the box?
Items that are included in the box:
• A Series amplifier
• Instruction manual
• Power cable
Features
• Full operating features: volume controls;
balanced phoenix connectors, screw
speaker connectors, stereo/bridge mode.
• Full safety/reliability features: 2 variable speed
fans for cooling; DC and thermal overload
protection; short circuit and speaker protection.
Hints on Installation
To ensure years of enjoyment from your A Series, please read and understand this manual thoroughly before
using the unit.
INSPECTION
Your A Series was carefully packed at the factory in packaging designed to protect the units in shipment.
Before installing and using your unit, carefully examine the packaging and all contents for any signs of
physical damage that may have occurred in transit.
(Note: A Series is not responsible for shipping damage. Remove if the unit is damaged, do not return to us, but
notify your dealer and the shipping company immediately to make a claim. Such claims must be made by the
consignee in a timely manner.)
RACK MOUNTING
The A Series amplifiers are designed for standard 19" rack mounting as well as "stack" mounting without
a cabinet. Use 4 screws and washers for mounting to the front rack rails. It is also a good idea to support
the amps also in the rear, especially for mobile use where the amps will be subjected to shocks.
AMPLIFIER COOLING
Also pay close attention to the cooling requirements. Never block the air vents in the back, side and front
of the amplifier if the load seen by amplifier is less than 4 ohms and the amplifier is being run at high
output levels. For best results, in such high output power applications you should augment the amplifier's
air flow with a rack cooling system.
• Power ON, Clip, Signal, and Protect LED
terminal
indicators for each channel.
• Roadworthy, rugged double rack space (1 U)
housing -115VAC 60Hz, -230VAC 50Hz select
switch and IEC.
Advertisement
