Table of Contents
Advertisement
O
I
THER
NFORMATION
T
ROUBLESHOOTING
If you are having a problem with your TV, try the suggestions below. If the problem persists, contact Life
Fitness Customer Support Services as outlined in Service Contacts at the end of this manual.
Problem
Reset the TV to factory settings
No picture, no sound
Poor or no picture, good sound
Good picture, no sound
No color
Only snow appears on the screen
Dotted lines or stripes
Double images or ghosts
Unable to switch to a particular
TV channel
20
Possible Solutions
Refer to the System Setup section for instruction on how to access the
Reset All option.
Make sure the power cord is plugged in.
Be sure the power is on by pressing the ON/OFF button on the remote
control or start pedalling on EZ Bike, Cross-Trainer and Stairclimber products.
Choose an alternate channel using the CHANNEL UP/DOWN
ARROW KEYS.
Refer to the System Setup section for instruction on how to access the
Picture Menu. Adjust the options as instructed to improve the picture quality.
Check the antenna and/or cable connections.
Ensure headphone jack is fully seated.
Press the volume up key on the remote control.
(headphones are required to hear sound)
Check the antenna and/or cable connections.
Confirm the correct country is selected. Refer to the System Setup
section for instruction on how to access the country option within the
TV Install Menu.
Refer to the System Setup section for instruction on how to access the
Picture Menu. Adjust the Contrast, Hue and/or Saturation options as
instructed to improve the picture quality.
Check the antenna and/or cable connections.
Make sure the channel selected is currently broadcasting.
Confirm the correct Air/Cable option is selected. Refer to the System Setup
section for instruction on how to access the Air/Cable option within the
TV Install Menu.
Adjust the antenna.
Move the TV away from other electronic equipment. Some electronic
equipment creates electrical noise, which can interfere with TV reception.
Check your outdoor antenna or call your cable service.
Confirm the correct Air/Cable option is selected. Refer to the System Setup
section for instruction on how to access the Air/Cable option within the
TV Install Menu.
Perform a channel scan or add a channel manually. Refer to the System
Setup section for instruction on how to access the channel scan or Add
Channel option within the TV Install Menu.
Advertisement
Table of Contents
