Table of Contents
Advertisement
6. Connectors
Ports
Voice Ports
Ethernet
Ports
Console Port
(Only VG3306/3310/3318)
7. IDC Connectors (Only for VG3310/3318)
IDC connector is used for the voice interface (FXS and FXO) on the frame model. IDC connector
can easily connect PBX line and telephone wire together to the gateway. No special tools are
required; please follow the instruction to install:
(Remarks: For IDC connector, it's better to use No. 24 wire, e.g. CAT 5)
Get the material ready
Insert the insulated wires directly into the
block for wire insertion
Push the block down until it is locked to
flush the conductor with the probe
Cut off the conductor outside the edge to avoid from
causing the circuit shortage
Label
Description
FXS
Connects to a telephone set or fax
machine
FXO
Connects to the phone line
LAN/Internet RJ-45 connector
MDI-X connects to a Modem
PC
RJ-45 connector
MDI connects to a PC
Console
RJ-45 connector/RS-232 Interface
9
VG3300
Push from here
series user guide
Advertisement
Table of Contents
