Using The Hp Display Assistant Utility - HP LE1851wl User Manual

To correct screen position (Horizontal Position or Vertical Position):
1.
Press the
Image Control > Horizontal Position and/or Vertical Position.
2.
Press the
the image in the display area of the monitor. The Horizontal Position shifts the image left or right;
the Vertical Position shifts the image up and down.
Figure 4-3

Using the HP Display Assistant Utility

HP Display Assistant, included on the software and documentation CD, is a software utility that guides
you through the tuning process with easy to understand instructions and background patterns designed
for each monitor control. It provides:
Accurate screen calibration through the use of step-by-step instruction Wizards to obtain the best
●
overall image quality.
Software control of the monitor image and color settings to eliminate dependence on the monitor's
●
front panel buttons and On-Screen Display (OSD) menu.
Defined preset display settings for each individual user in a multi-user environment.
●
Multiple preset display settings for a single user based on content and ambient lighting.
●
Asset Management and Power Management capabilities that include remote control for individual
●
or a group of displays on the domain from a centralized console application.
Power Saving Plug-in feature that applies power saving modes to the display and a schedule
●
power saving feature that allows the display to be set to idle (stand-by) mode or powered off after
a pre-determined time of inactivity.
The HP Display Assistant Utility has two modes of operation: Wizard and OSD mode. The preferred
method of use is Wizard mode, which takes you through a step-by-step process to accurately calibrate
the monitor. This method relies on a sequence of steps that will obtain the best display results when
completed.
NOTE:
Refer to the HP Display Assistant user guide for additional information about the software.
24 Chapter 4 Operating the Monitor
Menu button on the monitor's front panel to open the OSD Menu, and then select
+ (Plus) or – (Minus) buttons on the monitor's front panel to properly adjust the position of
Horizontal or Vertical Position Adjustment
ENWW