Download  Print this page

HP Compaq LE19f Disassembly Instructions Manual

Hide thumbs

Advertisement

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
Name / Model #1: HP Compaq LE19f LCD Monitor
Name / Model #2
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision A
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
3
0
0
0
0
0
1
3
0
0
0
0
0
Page 1

Advertisement

Table of Contents

   Also See for HP Compaq LE19f

   Related Manuals for HP Compaq LE19f

   Summary of Contents for HP Compaq LE19f

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 群 創 光 電 股 份 有 限 公 司 廠商名稱 A . 6 E c o l o g y o f T C O ' 0 3 頁 次 : 版本:V.2 11/16 MT190AW02 V.W (P/N: AW1900006W01) Sequence of Module Disassembly for Lamp Separation 1.
  • Page 4 群 創 光 電 股 份 有 限 公 司 廠商名稱 A . 6 E c o l o g y o f T C O ' 0 3 頁 次 : 版本:V.2 12/16 3.Remove the screw 3-1. remove the screws (there are three screws marked 3-2 The screws have removed.
  • Page 5 群 創 光 電 股 份 有 限 公 司 廠商名稱 A . 6 E c o l o g y o f T C O ' 0 3 頁 次 : 版本:V.2 13/16 5. Remove LCD Cell &PCBA 5-1 remove the LCD Cell & PCBA softly. 5-2 the LCD Cell &...
  • Page 6 群 創 光 電 股 份 有 限 公 司 廠商名稱 A . 6 E c o l o g y o f T C O ' 0 3 頁 次 : 版本:V.2 14/16 6-3 remove the Frame with hand softly 6-4 the Frame removed 7.Remove the Film 7-2 the Film removed...
  • Page 7 群 創 光 電 股 份 有 限 公 司 廠商名稱 A . 6 E c o l o g y o f T C O ' 0 3 頁 次 : 版本:V.2 15/16 8. Remove LGP 8-1 remove the LGP 8-2 the LGP removed 9.
  • Page 8 群 創 光 電 股 份 有 限 公 司 廠商名稱 A . 6 E c o l o g y o f T C O ' 0 3 頁 次 : 版本:V.2 16/16 10. Remove the LED 10-1 prizing the LED with a screw driver and pull it softly 10-2 the LED separated...
  • Page 9 Disassembly Flowchart for HP compaq LE19f Model Issue Date:2009.10.27 Initiator:Michael Loong Action Tool Photo Lay the Monitor on the desk, Unlock the 3 screws which fix the stand with the screw #1 Crossing Screw Driver driver Take out the bezel with hand.
  • Page 10 Remove the light wire from Power PCBA. Remove the FFC connector from Panel. Chassis assembly and panel Remove the FFC wire from PCBA Unlock the 4 screws which fix the IF board #2 Crossing Screw Driver to the chassis,unlock the 2 screws which fix #1 Crossing Screw Driver power socket to the chassis...
  • Page 11 Unlock the 2 screws which fix the IF PCBA #1 Crossing Screw Driver Unlock the 5 screws which fix the power #1 Crossing Screw Driver board,then take out the wires. Chassis Unlock the screw which fix the Hinge Cover #1 Crossing Screw Driver By pushing the rib of the base cover ,detach Base Cover and Arm Remove seven rubber foots and unlock four...
  • Page 12 Remove the arm rear cover Unlock the four screws which fix the Arm #1 Crossing Screw Driver front Unlock the 2 nuts which fix the shaft M6.0 spanner...

Comments to this Manuals

Symbols: 0
Latest comments: