Table of Contents
Advertisement
4.
To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing arm
plate and into the mounting holes on the monitor.
Figure 3-9
To attach the monitor to other mounting fixtures, follow the instructions included with the mounting
fixture to ensure that the monitor is safely attached.
CAUTION:
attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long
screws are required. Longer screws must not be used because they may damage the monitor. It is
important to verify that the manufacturer's mounting solution is compliant with the VESA standard
and is rated to support the weight of the monitor display panel. For best performance, it is
important to use the power and video cables provided with the monitor.
5.
Reconnect the cables to the monitor panel.
ENWW
Installing the Monitor on a Swing Arm
This monitor supports the VESA industry standard 100 mm mounting holes. To
Mounting the Monitor Panel
11
Advertisement
Table of Contents
