To use the auto-adjustment feature:
1.
Allow the monitor to warm up for 20 minutes before adjusting.
2.
Press the
You can also press the
●
the OSD Main Menu. Refer to
If the result is not satisfactory, continue with the procedure.
●
3.
Insert the CD in the disc drive. The CD menu is displayed.
4.
Select Open Auto-Adjustment Software. The setup test pattern is displayed.
5.
Press the
6.
Press the
16
Chapter 4 Operating the Monitor
OK/auto
button on the monitor front panel.
Menu
OK/auto
button on the monitor front panel to produce a stable, centered image.
ESC
key or any other key on the keyboard to exit the test pattern.
button, then select Image Control > Auto-Adjustment from
Adjusting the Monitor Settings on page 18
in this chapter.
ENWW