Functional Description; Installing / Removing Battery Pack - Black & Decker LCS1020 Instruction Manual

functional description

lcs1020
10
1
lcs1240
2
10
1
1. Trigger switch
2. Lock-off button
3. Front hand guard
4. Guide bar
5. Saw chain
6. Sprocket cover
7. Bar adjust locking knob
8. Chain tensioning knob
installing / reMoving
Battery pack
warning:
button is engaged to prevent switch actuation
before removing or installing battery.
to install Battery pack:
battery pack into tool until an audible click
is heard, as shown in figure a. Ensure
battery pack is fully seated and fully latched
into position.
to reMove Battery pack:
Depress the battery release button in the
back of the battery pack and pull battery
pack out of tool (figure a).
preparing your cHain
saw for use
warning:
all instructions. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious personal injury.
15
14
2
16
6
11
14
16
6
7
Make certain the lock-off
Insert
read and understand
11
3
8
7
3
8
9. Guide bar scabbard
10. Rear handle
11. Front handle
12. 20V Battery (not shown)
13. 40V Battery (not shown)
14. Oil cap
15. Oil primer bulb
16. Oil level indicator
a
9
9
5
4
9
5
4