Features And Benefits - Code Alarm Car Alarm Owner's Manual

Features and Benefits of Your Security System
3
• Automatic Arming
If the automatic arming is enabled the alarm will automatically arm and disable the vehicle
starter
1
minute after the ignition Is turned off. However, the doors will remal" unlocked unless
the passive lock option is enabled. Automatic arming can be disabled through vehicle option
programming, placing the vehicle in valet mode or by pressing the disarm button after the
Ignition Is turned off.
II
Auto Lock
If the passive lock optIon is enabled the doors will automatically lock 60 seconds after the
ignition is turned off.
JJ
Automatic Door Lock and Unlock
If aU protected openings are closed when the ignition key is turned to the on pOSition, the
security system will lock the doors. When the kay Is turned back off, the system will unlock
the doors to allow an easy exit from the vehicle. If desired, either one or both of these can be
turned of by your installer.
Ii
All entrances protected
Opening any door or entrance protected by the security system triggers the alarm's 125db
siren and flashes the vehicle parking lights.
II
Impact Detector
The impact detector senses any jolts or bumps associated with vehicle intrusion.
II
Personal Protection Feature (Real PaniC)
The Panic feature sounds the siren (or horn) sporadically and flashes the vehicle parking
lights, bringing attention tQ your vehicle and surrounding area.
IIlnterlor Status Indicator
The bright-red warning light creates an effective visual deterrent to a WOUld-be thief.
II
Illuminated Entry and Exit
Vehicle courtesy lights turn on for one minute when the system is disarmed and when the
ignition is turned off.
II
Remote Keyless Entry
Doors conveniently lock and unlock* when the alarm system is armed and disarmed.
II
Faulty Trigger Bypass .
If a door or entrance protected by the security system is left open, the system will arm after 4
minutes. The system If that trigger pOint is then closed then reopened the alarm will go off.
II
Trunk Release
The trunk release can be activated by pressing and holding the DISARMITRUNK button on
the remote transmitter.
II
SllentChoice
Allows selective arming or disarming of the security system with or without confirmations
chirps. Pressing the arm or disarm button the first time activates the selected function. Then
if
the same transmitter button is pressed again within 20 seconds the siren (or hom)
will
chirp,-
confirming the selected function.