Remote Start Safety Features; Using The "Quick-Stop" Feature (Optional) - Code Alarm Professional Series Owner's Manual

Remote Start Safety Features

For safety and security reasons, the system will shutdown or prevent the remote
vehicle starter from activating if any of the following occur:
1. The vehicle's hood is open.
2. The brake pedal is pressed prior to turning the ignition key to the ON
position.
3. The engine is over-revved (tach checking only).
4. Valet Mode is active. Refer to the Valet Mode section of this manual.
5. Remote Start Ready Mode is not set. Manual transmission vehicle's only.

Using the "Quick-stop" Feature (Optional)

If you want to make a short stop and keep your vehicle running (to keep the interior
warm or cool), the quick-stop feature allows you to do this while keeping your vehicle
secure and your keys with you. This feature is not available on all vehicles.
To engage Quick Stop:
1. Stop the vehicle and place the transmission in PARK.
2. With your foot off the brake pedal, use the Remote Start option noted
on page 4. The vehicle's parking lights will turn ON to indicate Quick Stop
Mode is activated.
3. Remove the keys from the ignition and exit the vehicle. Press the
button to lock the vehicle's doors if desired.
Note: Do not leave children or animals unattended in the vehicle when using the
quick-stop feature.
2019 Voxx Electronics Corporation. All rights reserved. 5