Advertisement
10
Programming Selectable Options, cont'd
ARM
Press to
turn feature
on or off
4. Press the Arm button to turn the option on or off.
The vehicle status indicator on the dashboard indicates whether
an option is on or off.
• If the selected option is ON, the indicator will light.
• If the selected option is OFF, the indicator will
turn off.
• The status indicator will turn on or off when an option is changed.
5. When changes are complete, press and release the emergency
override button to continue to the next option bank. (Siren or horn
will sound five (5) times.)
6. To reset all options back to factory defaults, press the DISARM button.
Note: Option Bank Installer options will never reset.
7. Turn ignition off to exit programming.
See Options Chart on page 14.
FCC COMPLIANCE
This device complies with Part 15 of the FCC rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
Warning!
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Features and Benefits of the F20/25
Two Easy-to-Use Weather-Resistant Remote Controls
The remote controls included with the F20/25 utilize durable,
moisture resistant cases and sealed rubber buttons for reliability
DISARM
and long life. Rolling code technology prevents the transmitter signals
Press to reset
all options to
from being duplicated. The button functions are clearly labeled to make
factory defaults
the F20/25 simple to operate.
Remote Keyless Entry
The F20/25 conveniently locks and unlocks vehicle doors and
RESET
opens the trunk or hatch by remote control.*
Press BOTH
butons to
Personal Protection Features
advance to
Remote Panic Alarm is among an array of features that enhance
next feature
personal safety.**
* If vehicle is equipped with power door locks and they are connected to the alarm system by your installer.
** May require additional connections, components, and/or charges. See your installer for details.
3
Advertisement
