Panel Controls For The Software Programs; Introduction; Control Panel Of The Audio Driver - Steinberg UR 824 Operation Manual

Panel Controls for the
Software Programs

Introduction

This section explains software operations for using
the UR824 with a computer.
NOTE
The software programs below do not apply to iPad.
Control Panel of the Audio
Driver
This is the control panel for selecting the general
settings of the audio driver. Click the upper tabs to
select the desired window.
Screenshot
How to Open the Window
Windows
•[Control Panel]  [Hardware and Sound] or
[Sounds, Speech, and Audio Devices]  [Yamaha
Steinberg USB Driver]
•From the Cubase series menu, [Devices] 
[Device Setup]  [Yamaha Steinberg USB ASIO]
 [Control Panel]
Mac
•[System Preferences]  [Yamaha Steinberg USB]
•From the Cubase series menu, [Devices] 
[Device Setup]  [Steinberg UR824]  [Control
Panel]  [Open Config App]

Panel Controls for the Software Programs

Panel Controls
(Device name) Window
This is the window for selecting the sample rate or
word clock source of the device.
Sample Rate (Windows only)
Selects the sample rate of the device.
Option: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz
NOTE
For Mac, select the sample rate of the device via the
Audio MIDI Setup.
Clock Source (Windows only)
Selects the word clock source of the device.
Option Clock Source
WCLK The word clock signal input to the
WCLK IN.
ADAT A The word clock signal input to the
OPTICAL A IN.
ADAT B The word clock signal input to the
OPTICAL B IN.
Internal The internal word clock signal.
NOTE
For Mac, select the word clock source of the device
via the Audio MIDI Setup.
Operation Manual
UR824
8