Panel Controls For The Software Programs; Control Panel Of The Audio Driver - Steinberg UR 28 M Operation Manual

Panel Controls for the
Software Programs
Control Panel of the Audio
Driver
This is the control panel for selecting the general
settings of the audio driver. Click the upper tabs to
select the desired window.
Screenshot
How to Open the Window
Windows
•[Start]  [Control Panel]  [Hardware and Sound]
or [Sounds, Speech, and Audio Devices] 
[Yamaha Steinberg USB Driver]
•From the Cubase series menu, [Devices] 
[Device Setup]  [Yamaha Steinberg USB ASIO]
 [Control Panel]
Mac
•[System Preferences]  [Yamaha Steinberg USB]
•From the Cubase series menu, [Devices] 
[Device Setup]  [Steinberg UR28M]  [Control
Panel]  [Open Config App]

Panel Controls for the Software Programs

Panel Controls
(Device name) Window
This is the window for selecting the sample rate or
word clock source of the device.
Sample Rate (Windows only)
Selects the sample rate of the device.
Option: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
NOTE
For Mac, select the sample rate of the device via the
Audio MIDI Setup.
Clock Source (Windows only)
Selects the word clock source of the device.
Option Clock Source
S/PDIF The word clock signal input to S/
PDIF IN.
Internal The internal word clock signal.
NOTE
For Mac, select the word clock source of the device
via the Audio MIDI Setup.
Enable Power Management
Select enable (checkmark) and disable (no
checkmark) for automatic power off.
The device is equipped with an automatic power
off function. When this function is enabled, the
power of the device will turn off automatically
(after thirty minutes) when one of the following
actions is performed. The power button will flash
during the thirty-minute interval.
• Turning off the computer.
• Disconnecting the USB cable between the device
and the computer.
Operation Manual
UR28M
8