a2b Kuo+ Owner's Manual page 18

6.5 At the end of your ride
You should turn off your display and battery before storing.
If you have any questions, or if you feel anything about your A2B
Kuo+ is not as it should be, ask your A2B dealer before you ride
again.
6.6 Recharge your battery
Fully recharge your battery as soon as possible because a lithium
ion battery left in a discharged condition deteriorates much faster
than a fully charged battery. See Sections 7.2 & 7.3.
6.7 Understanding the range of your A2B Kuo+
Factors affecting range:
• Battery state-of-charge.
• Tyre inflation pressure.
• Front wheel bearings and both brakes (tight bearings or a
dragging brake shoe reduces range).
• Rider weight (it takes more battery power to accelerate a heavier
person).
• Your speed and local wind conditions (range is reduced when
travelling fast against a strong wind).
• Terrain (travelling on a soft or rough surface or climbing a hill uses
more power).
• Lots of starts and stops (full power from a standing start draws
the most current or amperage from the battery).
18
Maximise your range
• Fully check your battery before each ride.
• Check tyre pressure regularly and inflate to 40 psi (or stated
pressure printed on the tyre sidewall).
• Have your A2B Kuo+ serviced periodically to ensure that the
front bearings turn freely and both brake caliper DO NOT rub the
brake shoes when they are not applied.
• Minimise the weight that you carry.
• Ride at slower speeds.
• Accelerate more slowly as you move to your cruising speed.
• Keep the chain and derailleur lubricated with a chain spray
recommended for bicycle use.
Owner`s manual