a2b Kuo+ Owner's Manual page 11

5.6 Seat height adjustment
The seat may require adjustment.
Ask your A2B dealer to adjust it before you ride.
To determine the correct height of the seat for the rider
1. Straddle the assembled A2B Kuo+ with your feet shoulder width
apart and fl at on the ground.
2. There must be at least 25 mm (1inch) clearance between the
intersection of the main tube and the seat post and the crotch of
the rider.
3. The minimum inside leg height is measured from the intersection
of the top tube and seat post plus 25 mm and the fl oor. The
minimum inside leg height for this bicycle is 50 cm (20 inches)
Height adjustment:
1. The seat height can be adjusted by
releasing the quick release lever, then
raise or lower the seat accordingly and
tighten the quick release lever when the
desired height is achieved.
2. After adjustment, check to ensure the
lever is tightly fastened and ensure there
is no movement in the seat post in any
direction.
3. The seat post clamp should be securely tightened.
Failure to correctly secure the seat can result in serious injury or
death.
DO NOT raise the seat beyond the 'minimum insertion'
mark identifi ed on the seat post.
11