Before First Use; Work Bowl Assembly - KitchenAid Pro Line KPFP850 User Manual

PREPARING

Before First Use

Before using your food processor for the first time, wash the work
bowl, work bowl cover, chef's bowl, mini bowl, feed tube pusher,
discs, and blades either by hand or in the dishwasher (see "Care and
Cleaning" on page 21).

Work Bowl Assembly

1. Place the food processor base on a dry, level countertop with
the controls facing forward. Do not plug in the unit until it is
completely assembled.
2. With the handle just to the left of center, place the work bowl
on the base, fitting the center opening over the power shaft.
3. Grasp the work
bowl handle and
turn the bowl to
the right until it
locks into position.
12
THE
FOOD PROCESSOR
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
4. Insert the desired accessory into the work bowl. See pages
13–16 for accessory instructions.
5. Place the work bowl cover on the work bowl with the feed
tube just to the left of the work bowl handle. Grasp the feed
tube and turn the cover to the right until it locks into place.
NOTE: Do not attach the cover to the work bowl before the
work bowl is locked on the base. Damage to the work bowl
may result.
FOR USE