Related Manuals for ATV BHR7212MR
Summary of Contents for ATV BHR7212MR
- Page 1 INSTRUCTION MANUAL DNR Super High Resolution Day & Night Color Camera Outdoor Bullet Camera Please read this manual thoroughly before use, and keep it handy for future reference.
- Page 2 WARNINGS AND CAUTIONS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).
- Page 3 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Page 4 FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL...
- Page 5 CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the color camera and its accessories from the carton and verify that they were not damaged in shipment. The contents of the package include: 1.
-
Page 6: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ----------------------------------------------------------------------------------------- 1 CAMERA CONNECTION & CONTENSTS of PACKAGE ------------------------------------- 2 CONTENTS of PACKAGE & QUICK INSTALL ------------------------------------------------- 3 OSD MENU STRUCTURE ---------------------------------------------------------------------------- 5 AUTO WHITE DEFECT & LENS ADJUSTMENT ---------------------------------------------- 12 SPOT OUT / JOY STICK KEY --------------------------------------------------------------------- 13 EXTERNAL DIMENSION ---------------------------------------------------------------------------- 14 SPECIFICATIONS ------------------------------------------------------------------------------------- 15... -
Page 7: Introduction
INTRODUCTION The camera provides high-quality images using SONY 1/3” CCD and digital Signal process LSIs. Features: ● 1/3" HAD CCD Ⅱ for an image of high sensitivity ● 2.8~12mm D/N Vari-focal(DC AI) / 5~50mm D/N Vari-focal(DC AI) ● Digital Wide Dynamic Range (Adaptive Tone Reproduction) ●... -
Page 8: Camera Connection & Contensts Of Package
CAMERA CONNECTION 1. Bullet Camera 2. Power : power source from a DC 12V or AC 24V 3. Video : BNC connector used to connect the camera to a monitor, switcher, etc. -
Page 9: Contents Of Package & Quick Install
CONTENTS of PACKAGE QUICK INSTALL 1. Drill the mounting location using the supplied drill guide template 2. Attach the bullet housing to the ceiling or wall using suitable fasteners, PTS M5 x 30MM screws are supplied only use if they are suitable. 3. -
Page 11: Osd Menu Structure
OSD MENU STRUCTURE SETUP MENU (page 1) LENS SHUTTER/AGC LENS SHUTTER/AGC AUTO ↵ WHITE BAL AUTO↵ BACKLIGHT MANUAL MANUAL↵ PICT ADJUST MOTION DET NEXT (page2) EXIT SAVE ALL WHITE BALANCE BACKLIGHT ATW ↵ PUSH USER 1↵ USER 2↵ ANTI CR MANUAL↵... - Page 12 SETUP MENU (page 2) PRIVACY PRIVACY DAY/NIGHT DAY/NIGHT COLOR CAMERA ID ON↵ B/W↵ LANGUAGE CAMERA RESET BACK (page 1) EXIT SAVE ALL CAMERA ID NR↵ NR MODE Y LEVEL ON↵ C LEVEL RETURN LANGUAGE CAMERA RESET ENGLISH 日本語 (return the camera to factory defaults) DEUTSCH FRANCAIS...
- Page 13 LENS AUTO TYPE (DC / VIDEO) Sets the type of mechanical iris (Video lens is not supported) MODE (AUTO / OPEN / CLOSE ) Sets the type of control to be applied over the mechanical iris. SPEED (0 – 255) Sets the convergence speed of the mechanical iris.
- Page 14 WHITE BAL ATW (Auto Trace White balance) SPEED (0~255) Adjusts the pull-in speed of ATW. DELAY CNT (0~255) Sets the time-based hysteresis of ATW. ATW FRAME (x0.5 / x1 / x1.5 / x2) Sets the pull-in frame magnification. ENVIROMENT (INDOOR / OUTDOOR) Preset for either indoor or outdoor applications of the ATW PUSH Wide range Auto White Balance mode (AWB)
- Page 15 ATR (Adaptive Tone Reproduction) allows adjustment of the image to assist with widely contrasting scenes of view. LUMINANCE (LOW / MID / HIGH) Sets the extent of the luminance compression CONTRAST (LOW / MIDLOW / MID / MIDHIGH / HIGH) Sets the extent of the contrast enhancement MOTION DET DETECT SENSE (0~127)
- Page 16 LEFT (NTSC:0~474 , PAL:0~468) 0 = left RIGHT (NTSC:0~474 , PAL:0~468) 474(468) = right COLOR (1~8) Sets the colors of the privacy zones. TRANSP (0.00 / 0.50 / 0.75 / 1.00) Sets the transparency of the privacy zone area if color is selected. MOSAIC (OFF / ON) Sets the mosaic function as the privacy to ON or OFF.
- Page 17 CAMERA ID Sets the camera ID to ON or OFF. A title of 52 characters per line can be applied. Use the joystick to navigate the cursor. Pushing centrally on the joystick will allow selection of that character. The arrows at the bottom allow you to move the cursor without changing the character.
-
Page 18: Auto White Defect & Lens Adjustment
AUTO WHITE DEFECT (Compensation for defected pixel on CCD) Push the left button for 5 seconds and enter Auto white defect menu. Cover the lens and Enter for starting. If white defects are over 65pcs, the camera is faulty and auto defect is useless. -
Page 19: Spot Out / Joy Stick Key
Lens 5 ~ 50 mm 2.8 ~ 12 mm Image 1/3’’ CCD Size Focal 5 ~ 50 mm 2.8 ~ 12 mm Length Angular HORIZONTAL Field of 51.5° ~ 6.5° 100.8 ° ~ 23.7 ° View SPOT OUT / JOY STICK KEY Spot Out Cable with BNC connector is supplied with this product. -
Page 20: External Dimension
EXTERNAL DIMENSION... -
Page 21: Specifications
SPECCIFICATIONS MODEL NTSC Power source DC 12V / AC 24V±10% Power Power consumption 6 Watts (550mA) / 45Watts(3.5A) with Heater Image sensor 1/3″ SONY HAD CCD II Total pixels 1020(H) x 508(V) 1020(H) x 596(V) Effective pixels 976(H)x494(V) 976(H)x582(V) Scanning system 2:1 Interlace 15.734KHz(H) 15.625KHz(H) - Page 22 DNR Super High Resolution Day & Night Color Camera PRINTED IN KOREA...